
www.meas-
Measurement Specialties Inc. NetScanner System (9016, 9021, & 9022) User’s Manual
3 - 13
3.2 Detailed Command Description Reference
All commands applicable to the various models of the NetScanner
System Intelligent Pressure
Scanner modules are described on the following pages. They are summarized in the following
table. For convenience, this table is also repeated in Appendix B.
Table 3.2
Intelligent Pressure Scanner Commands
Type
Command id
Command Function
C
Configure/Control Multi-Point Calibration (4
Calculate and Set Gains (Span Cal)
Read Transducer Raw A/D Counts
c
Define/Control Autonomous Host Streams (6
Calculate and Set Offsets (Re-zero Cal)
Read Temperature A/D Counts
Read Transducer Temperature
Read Internal Coefficients
Download Internal Coefficients
Set/Do Operating Options/Functions
UDP/IP
Broadcast
psirarp
Change Specified Module’s IP Address
Resolution Method (then Reboot)
Commentaires sur ces manuels