Pressure Systems 9022 Manuel d'utilisateur télécharger pdf (Page 97)

www.meas-

spec.com

Measurement Specialties Inc. NetScanner System (9016, 9021, & 9022) User’s Manual

1 - 64

A special single Other Coefficients array is selected with array index aa=11 (hex).

All the valid coefficient indexes (for this array only) are listed in the following table:

Other Coefficients Description

Datum

Type

reserved - EU conversion offset term

FLOAT

EU Pressure Conversion scaler (default=1.0)

FLOAT

Reserved - EU conversion Non-Linearity term

FLOAT

Reserved-Reference Voltage value

FLOAT

Gain=1 Reference Coefficient (9021/9022 only)

FLOAT

Gain=20 Reference Coefficient (9021/9022 only)

FLOAT

Gain=45 Reference Coefficient (9021/9022 only)

FLOAT

Gain=90 Reference Coefficient (9021/9022 only)

FLOAT

Temperature Gain Reference Coefficient (9022

only)

FLOAT

Example:

• Send TCP/IP command to module (via its connected socket) requesting the most

recent calibration adjustment’s offset and gain terms (cc=00-01), and the adjacent

factory-determined transducer coefficients C0 through C4 (cc=02-06) for

transducer 1: Data requested in ASCII-hex format representing the internal binary

floating point format.

“u10100-06”

Response returned is:

“ 3B200A6E . . 00000000”

NOTE: The maximum response size is 300 characters. If the requested

range of coefficients requested exceeds this, the module will return an “N07"

error response.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 193 194

Pas de commentaire

Pressure Systems 9022 Manuel d'utilisateur Page 97